Magnetici con forze adesive

  • COD: 36.640410Z

    Afferrare il personale con una maggiore potenza adesiva

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB) 
    Tolleranza passaporto H6
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. KM* (mm) Forza (N)
    36.640410Z 4,0 h 6 10,0 +/-0,2 5,0 2,5
    36.640510Z 5,0 h 6 10,0 +/-0,2 5,0 4,5
    36.640610Z 6,0 h 6 10,0 +/-0,2 5,0 6
    36.640812Z 8,0 h 6 12,0 +/-0,2 7,0 12
    36.641016Z 10,0 h 6 16,0 +/-0,2 11,0 24
    36.641318Z 13,0 h 6 18,0 +/-0,2 13,0 60
    36.641620Z 16,0 h 6 20,0 +/-0,2 15,0 90
    36.642025Z 20,0 h 6 25,0 +/-0,2 18,0 135
    36.642530Z 25,0 h 6 30,0 +/-0,2 22,0 190
    36.643235Z 32,0 h 6 35,0 +/-0,2 27,0 340

    Senza tolleranza passaporto
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. KM* (mm) Forza (N)
    36.650420 4,0 +/-0,2 20,0 +/-0,2 15,0 2,5
    36.650520 5,0 +/-0,2 20,0 +/-0,2 15,0 4,5
    36.650620 6,0 +/-0,2 20,0 +/-0,2 15,0 6
    36.650820 8,0 +/-0,2 20,0 +/-0,2 15,0 12
    36.651020 10,0 +/-0,2 20,0 +/-0,2 15,0 24
    36.651320 13,0 +/-0,2 20,0 +/-0,2 15,0 60
    36.651620 16,0 +/-0,2 20,0 +/-0,2 15,0 90
    36.652025 20,0 +/-0,2 25,0 +/-0,2 18,0 135
    36.652535 25,0 +/-0,2 35,0 +/-0,2 27,0 190
    36.653240 32,0 +/-0,2 40,0 +/-0,2 32,0 340

    Design corto
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. KM* (mm) Forza (N)
    36.650610K 6,0 +/-0,2 10,0 +/-0,2 5,0 6
    36.651016K 10,0 +/-0,2 16,0 +/-0,2 11,0 24

    * Senza ridurre la forza adesiva, è possibile accorciare il sistema con la misura (KM).

     

  • COD: 35.694331

    Blocco collo magnetico con guaina in gomma, con filettatura interna M 4

    Nuclei magnetici da NdFeB

    Art-Nr. L (mm) B (mm) H (mm) Filo Forza (N) Peso (g)
    35.694331 43,0 31,0 6,0 M4 105 27
    35.694331/2 43,0 31,0 6,0 2 x M4 146 28

    Temperatura massima di esercizio: 60 ° c

     

  • COD: 35.2201011

    Design piatto con boccola filettata

    Alloggiamento zincato, temperatura di esercizio fino a 200 ° c

    Art.-Nr. D (mm) Tol. d (mm) H (mm) h (mm) Tol. Filo
    Peso.(g) Materiale.(N)
    35.2201011 10,0 +/-0,2 6,0 11,5 4,5 +0,2/-0,1 M 3 3,0 4
    35.2201311 13,0 +/-0,2 6,0 11,5 4,5 +0,2/-0,1 M 3 4,0 10
    35.2201611 16,0 +/-0,2 6,0 11,5 4,5 +0,2/-0,1 M 3 6,0 18
    35.2202013 20,0 +/-0,2 6,0 13,0 6,0 +0,2/-0,1 M 3 11,0 30
    35.2202515 25,0 +/-0,2 8,0 15,0 7,0 +0,2/-0,1 M 4 20,0 40
    35.2203215 32,0 +/-0,3 8,0 15,0 7,0 +0,3/-0,2 M 4 31,0 80
    35.2203616 36,0 +/-0,3 8,0 16,0 7,7 +0,3/-0,2 M 4 42,0 100
    35.2204016  40,0 +/-0,3 8,0 16,5 8,0 +0,3/-0,2 M 4 57,0 125
    35.2204018  40,0 +/-0,3 10,0 18,0 8,0 +0,3/-0,2 M 5 59,0 125
    35.2204717  47,0 +0,5/-0,3 8,0 17,0 9,0 +0,4/-0,2 M 4 86,0 180
    35.2204721  47,0 +0,5/-0,3 12,0 21,0 9,0 +0,4/-0,2 M 6 91,0 180
    35.2205018  50,0 +0,5/-0,3 8,0 18,5 10,0 +0,4/-0,2 M 4 105,0 220
    35.2205022  50,0 +0,5/-0,3 12,0 22,0 10,0 +0,4/-0,2 M 6 111,0 220
    35.2205718  57,0 +0,6/-0,3 8,0 18,5 10,5 +0,5/-0,2 M 4 147,0 280
    35.2205722  57,0 +0,6/-0,3 12,0 22,5 10,5 +0,5/-0,2 M 6 153,0 280
    35.2206322  63,0 +0,6/-0,3 8,0 22,0 14,0 +0,5/-0,2 M 4 228,0 350
    35.2206330  63,0 +0,6/-0,3 15,0 30,0 14,0 +0,5/-0,2 M 8 245,0 350
    35.2208028  80,0 +0,6/-0,3 12,0 28,5 18,0 +0,5/-0,2 M 6 477,0 600
    35.2208034  80,0 +0,6/-0,3 20,0 34,0 18,0 +0,5/-0,2 M10 499,0 600
    35.2210043  100,0 +0,6/-0,3 22,0 43,0 22,0 +0,5/-0,2 M12 956,0 900
    35.2212550  125,0 +0,6/-0,3 25,0 50,0 26,0 +0,5/-0,2 M14 1720,0 1300

    Cassa acciaio inox, temperatura di esercizio fino a 220 ° c

    Art-Nr. D (mm) Tol. d (mm) H (mm) h (mm) Tol. Filo Peso. Materiale(N)
    352202516E 25,0 +/-0,2 8,0 16,0 7,0 +0,2/-0,1 M 5 20,0 32
    352203216E 32,0 +/-0,3 8,0 16,0 7,0 +0,3/-0,2 M 5 31,0 64
    352204016E 40,0 +/-0,3 8,0 16,5 8,0 +0,3/-0,2 M 5 56,0 100
    352205018E 50,0 +0,5/-0,3 8,0 18,5 10,0 +0,4/-0,2 M 5 105,0 175
    352206322E 63,0 +0,6/-0,3 8,0 22,0 14,0 +0,5/-0,2 M 5 228,0 280
    352202516E 25,0 +/-0,2 8,0 16,0 7,0 +0,2/-0,1 M 5 20,0 32
    352203216E 32,0 +/-0,3 8,0 16,0 7,0 +0,3/-0,2 M 5 31,0 64
    352204016E 40,0 +/-0,3 8,0 16,5 8,0 +0,3/-0,2 M 5 56,0 100
    352205018E 50,0 +0,5/-0,3 8,0 18,5 10,0 +0,4/-0,2 M 5 105,0 175
    352206322E 63,0 +0,6/-0,3 8,0 22,0 14,0 +0,5/-0,2 M 5 228,0 280
  • COD: 35.2605010

    Design piatto con cil. Through Hole

    Alloggiamento zincato, temperatura di esercizio fino a 200 ° C

    Art-Nr. D (mm) Tol. d1 (mm) d2 (mm) H (mm) Tol. Peso Materiale(N)
    35.2605010 50,0 +0,5/-0,3 8,5 22,0 10,0 +0,5/-0,2 85,0 180,0
    35.2605711 57,0 +0,6/-0,3 6,5 24,0 11,0 +0,5/-0,2 130,0 230,0
    35.2606314 63,0 +0,6/-0,3 6,5 24,0 14,0 +0,5/-0,2 197,0 290,0
    35.2608010 80,0 +0,6/-0,3 6,4 32,0 10,0 +0,5/-0,2 235,0 450,0
    35.2608018 80,0 +0,6/-0,3 6,5 11,5 18,0 +0,5/-0,2 458,0 540,0
    35.2608318 83,0 +0,6/-0,3 10,5 32,0 18,0 +0,5/-0,2 444,0 600,0
    35.2610022 100,0 +0,6/-0,3 10,5 34,0 22,0 +0,5/-0,2 815,0 680,

    Corpo in acciaio inossidabile, temperatura di esercizio fino a 220 ° C

    Art-Nr. D (mm) Tol. d1 (mm) d2 (mm) H (mm) Tol. Peso Materiale (N)
    35.2605010E 50,0 +0,5/-0,3 8,5 22,0 10,0 +0,5/-0,2 85,0 145,0
    35.2606314E 63,0 +0,6/-0,3 6,5 24,0 14,0 +0,5/-0,2 195,0 230,0

     

     

     

     

  • COD: 35.672507

    Design piatto con filettatura interna

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB)
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. Filo Peso(g) Forza (N)
    35.672507 25,0 +/-0,1 7,0 +/-0,2 M4 24,0 160
    35.673207 32,0 +/-0,3 7,0 +/-0,2 M 5 40,0 330
    35.674008 40,0 +/-0,3 8,0 +/-0,2 M 5 74,0 500
    35.675010 50,0 +/-0,3 10,0 +/-0,2 M 8 140,0 800
    35.676314 63,0 +/-0,3 14,0 +/-0,2 M 10 315,0 1100
    35.677515 75,0 +/-0,3 15,0 +/-0,2 M 10 479,0 1750
  • COD: 35.275013

    Design piatto con filettatura interna, giacca in acciaio

    Magneti in ceramica a vaso piatto con rivestimento in acciaio, temperatura di esercizio fino a 100 ° C

    Art-Nr. D(mm) H(mm) Filetto Materiale(N)
    35.275013 50,0 13,0 M 8 150,0
    35.278020 80,0 20,0 M 10 400,0
    35.279013 90,0 13,0 M 10 600,0
  • COD: 35.272504

    Design piatto con filettatura interna, zincato

    Art-Nr. D(mm) Tol.
    H(mm) Tol.
    G
    K(mm) Peso
    Materiale
    (N)
    35.272504 25,0 +/-0,2 7,0 +0,3/-0,2 M4 5,2 18,0 36,0
    35.273204 32,0 +/-0,3 7,0 +0,3/-0,2 M4 5,2 29,0 75,0
    35.274004 40,0 +/-0,3 8,0 +0,4/-0,2 M4 5,2 53,0 90,0
    35.275006 50,0 +0,5/-0,3 10,0 +0,5/-0,2 M6 12,0 94,0 170,0
    35.275008 50,0 +0,5/-0,3 10,0 +0,5/-0,2 M8 12,0 94,0 170,0
    35.276308 63,0 +0,6/-0,3 14,0 +0,5/-0,2 M8 13,0 206,0 290,0
    35.278008 80,0 +0,6/-0,3 18,0 +0,5/-0,2 M8 14,5 472,0 550,0
    35.278010 80,0 +0,6/-0,3 18,0 +0,5/-0,2 M10 14,5 466,0 550
  • COD: 35.561604

    Design piatto con foro passante

    Alloggiamento zincato, temperatura di esercizio fino a 200 ° c

    Art-Nr. D(mm) Tol. d1(mm) d2(mm) H(mm) Tol. Peso.(g) Forza.(N)
    35.561604 16,0 +/-0,1 3,5 6,6 4,5 +/-0,1 6 57
    35.562006 20,0 +/-0,1 4,5 9,3 6,0 +/-0,1 13 81
    35.562507 25,0 +/-0,1 4,5 9,2 7,0 +/-0,1 25 105
    35.563207 32,0 +/-0,1 5,5 11,5 7,0 +/-0,1 40 235
    35.564008 40,0 +/-0,1 5,5 11,5 8,0 +/-0,1 75,0 540
  • COD: 35.281011

    Design piatto con perno filettato

    Alloggiamento zincato, temperatura di esercizio fino a 200 ° C

    Art-Nr. D (mm) Tol. H (mm) h (mm) Tol. G Peso Materiale (N)
    35.281011 10,0 +/-0,2 11,5 4,5 +0,2/-0,1 M3 2,0 4,0
    35.281311 13,0 +/-0,2 11,5 4,5 +0,2/-0,1 M3 3,0 10,0
    35.281610 16,0 +/-0,2 10,5 4,5 +0,2/-0,1 M4 5,0 18,0
    35.281611 16,0 +/-0,2 11,5 4,5 +0,2/-0,1 M3 5,0 18,0
    35.282013 20,0 +/-0,2 13,0 6,0 +0,2/-0,1 M3 10,0 30,0
    35.282036 20,0 +/-0,2 36,0 6,0 +0,2/-0,1 M6 15,0 30,0
    35.282515 25,0 +/-0,2 15,0 7,0 +0,3/-0,2 M4 19,0 40,0
    35.282522 25,0 +/-0,2 22,0 7,0 +0,3/-0,2 M5 20,0 40,0
    35.282527 25,0 +/-0,2 27,0 7,0 +0,3/-0,2 M6 22,0 40,0
    35.283215 32,0 +/-0,3 15,0 7,0 +0,3/-0,2 M4 30,0 80,0
    35.283217 32,0 +/-0,3 17,0 7,0 +0,3/-0,2 M8 32,0 80,0
    35.283219 32,0 +/-0,3 19,0 7,0 +0,3/-0,2 M6 31,0 80,0
    35.284717 47,0 +0,5/-0,3 17,0 9,0 +0,5/-0,2 M6 85,0 180,0
    35.285718 57,0 +0,6/-0,3 18,5 10,5 +0,5/-0,2 M6 146,0 280,0
    35.286329 63,0 +0,6/-0,3 29,0 14,0 +0,5/-0,2 M6 233,0 350,0
  • COD: 35.29191430

    Magnete a barra con involucro di plastica, bianco

    Art-Nr. Lungh. Largh. Altezza Tot. Forza (N) Nucleo Magnetico Strutture
    35.29191430 19,0 14,0 30,0 20 Ferrite dura Occhiello
    35.29342935 34,0 29,0 35,0 100 Ferrite dura Gancio
    35.29421437 42,0 14,0 37,0 55 Ferrite dura Gancio
    35.29532728 53,0 27,5 28,0 150 Ferrite dura Gancio
    35.29532728ND 53,0 27,5 28,0 400 Neodimio Gancio
    35.29571539 57,0 15,0 39,0 115 Ferrite dura Gancio
    35.29585841 58,0 58,0 41,5 300 Ferrite dura Occhiello

     

  • COD: 37.341907

    Magnete piatto con rivestimento in acciaio

    Alloggiamento zincato, temperatura di esercizio fino a 450 ° c

    Art-Nr. D(mm) D (mm) H(mm) Forza (N)
    37.341907 19,1 3,7 7,5 30
    37.342808 28,6 4,8 8,5 50
    37.343810 38,1 4,8 10,4 130

     

  • COD: 37.321716

    POT magnete con cappotto in acciaio

    Alloggiamento zincato, temperatura di esercizio fino a 450 ° c

    Art-Nr. D(mm) Filo H (mm) Forza (N)
    37.321716 17,5 M 6 16,0 26
    37.322019 20,6 M 6 19,0 40
    37.322725 27,0 M 6 25,0 61
    37.323530 35,0 M 6 30,0 147
    37.326543 65,0 M 12 43,0 400
  • COD: 35.692212

    Sistemi magnetici con guaina in gomma, con coni filettati

    Nuclei magnetici da NdFeB

    Art-Nr. D(mm) Altezza totale (mm) Filo Forza (N)
    35.692212 22,0 12,5 M 4 x 6,5 58
    35.694321* 43,0 21,0 M 6 x 15 100
    35.696623* 66,0 23,5 M 8 x 15 250
    35.698823* 88,0 23,5 M 8 x 15 550

    max. Einsatztemperatur 60 ° c
    max. Einsatztemperatur 80 ° c

  • COD: 35.693106

    Sistemi magnetici con guaina in gomma, con filettatura interna

    Nuclei magnetici da NdFeB

    Art-Nr. D(mm) Altezza totale (mm) Filo Forza (N)
    35.693106 31,0 6,0 M5 89
    35.693106-DG * 31,0 6,0 M5 89

    Temperatura massima di esercizio 60 ° c
    35,693106-DG con filettatura interna continua

  • COD: 35.691214

    Sistemi magnetici con guaina in gomma, con presa filettata

    Nuclei magnetici da NdFeB

    Art-Nr. D(mm) Altezza totale (mm) Filo Forza (N)
    35.691214 12,0 14,8 M 4 13
    35.692206 22,0 6,0 M 4 38
    35.692211 22,0 11,5 M 4 58
    35.693111 31,0 11,5 M 4 89
    35.694311 43,0 10,5 M 4 100
    35.696615* 66,0 15,0 M 5 250
    35.698817* 88,0 17,0 M 8 550

    max. Einsatztemperatur 60 ° c
    max. Einsatztemperatur 80 ° c

  • COD: 35.2943121

    Sistemi magnetici con guaina in plastica, con usura errata. Infissi

    Sistema magnetico con nucleo in ferrite duro e rivestimento in plastica bianca.

    Art-Nr. D (mm) Totale (mm) Forza (N)
    35.2943121 43,0 12,5 Esecuzione chiusa 120
    35.2943123 43,0 31,0 Con occhiello 120
    35.2943124 43,0 37,0 Con ganci 120
    35.2943122 43,0 12,5 Con foro di passaggio (5,5 mm) e riduzione 90 ° 120
    35.2943125 43,0 12,5 Con filetto di passaggio M4 120
    35.2943126 43,0 12,5 Con filetto di passaggio M5 120
  • COD: 36.630620

    Stabble con forza adesiva rinforzata, con filettatura interna

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB)
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. Filo Forza (N)
    36.630620 6,0 +/-0,2 20,0 +/-0,2 M3 x 5 6
    36.630820 8,0 +/-0,2 20,0 +/-0,2 M3 x 5 12
    36.631020 10,0 +/-0,2 20,0 +/-0,2 M4 x 7 24
    36.631320 13,0 +/-0,2 20,0 +/-0,2 M4 x 7 60
    36.631620 16,0 +/-0,2 20,0 +/-0,2 M4 x 7 90
    36.632025 20,0 +/-0,2 25,0 +/-0,2 M6 x 9 135
    36.632535 25,0 +/-0,2 35,0 +/-0,2 M6 x 9 190
    36.633240 32,0 +/-0,2 40,0 +/-0,2 M8 x 12 340
    36.634050 40,0 +/-0,2 50,0 +/-0,2 M8 x 12 700
    36.635060 50,0 +/-0,2 60,0 +/-0,2 M10 x 12 1000
    36.636365 63,0 +/-0,2 65,0 +/-0,2 M12 x 14 1700
    36.630620 6,0 +/-0,2 20,0 +/-0,2 M3 x 5 6

     

  • COD: 36.380628

    Versione cilindrica con coni lisci

    Sistemi magnetici con nucleo in alluminio nickel cobalto (AlNiCo)
    Alloggiamento zincato, temperatura di esercizio fino a 450 ° c

    Art-Nr. D (mm) Tol. d (mm) Tol. H (mm) Tol. H u. h h (mm) KM* (mm) Peso
    (g)
    Forza(N)
    36.380628 6,0 +/-0,2 3,0 +/-0,2 28,0 +/-0,2 20,0 12,0 4,0 1,7
    36.380828 8,0 +/-0,2 3,0 +/-0,2 28,0 +/-0,2 20,0 10,0 7,0 4,0
    36.381028 10,0 +/-0,2 4,0 +/-0,2 28,0 +/-0,2 20,0 10,0 12,0 8,5
    36.381328 13,0 +/-0,2 4,0 +/-0,2 28,0 +/-0,2 20,0 8,0 20,0 12,0
    36.381628 16,0 +/-0,2 5,0 +/-0,2 28,0 +/-0,2 20,0 6,0 30,0 20,0
    36.382033 20,0 +/-0,2 6,0 +/-0,2 33,0 +/-0,2 25,0 6,0 60,0 50,0
    36.382545 25,0 +/-0,3 8,0 +/-0,2 45,0 +/-0,2 35,0 15,0 128,0 60,0
    36.383250 32,0 +/-0,3 10,0 +/-0,2 50,0 +/-0,2 40,0 10,0 220,0 160,0
    36.384070 40,0 +/-0,3 15,0 +/-0,2 70,0 +/-0,2 50,0 10,0 468,0 240,0
    36.385085 50,0 +/-0,3 18,0 +/-0,2 85,0 +/-0,2 60,0 12,0 872,0 400,0
    36.386395 63,0 +/-0,3 20,0 +/-0,2 95,0 +/-0,2 65,0 10,0 1371,0 660,0

    * Senza ridurre la forza adesiva, è possibile accorciare il sistema con la misura (KM).

  • COD: 36.370620

    Versione cilindrica con foratura filettata

    Sistemi magnetici con nucleo in alluminio nickel cobalto (AlNiCo)
    Alloggiamento zincato, temperatura di esercizio fino a 450 ° c

    Art-Nr. D(mm) Tol. H (mm) Tol Filo Peso Forza (N)
    36.370620 6,0 +/-0,2 20,0 +/-0,2 M 3 x 5 4,0 2,0
    36.370820 8,0 +/-0,2 20,0 +/-0,2 M 3 x 5 7,0 4,0
    36.371020 10,0 +/-0,2 20,0 +/-0,2 M 4 x 7 11,0 8,5
    36.371320 13,0 +/-0,2 20,0 +/-0,2 M 4 x 7 20,0 12,0
    36.371620 16,0 +/-0,2 20,0 +/-0,2 M 4 x 5 30,0 20,0
    36.372025 20,0 +/-0,2 25,0 +/-0,2 M 6 x 7 55,0 40,0
    36.372535 25,0 +/-0,3 35,0 +/-0,2 M 6 x 9 125,0 60,0
    36.373240 32,0 +/-0,3 40,0 +/-0,2 M 8 x 9 220,0 160,0

     

  • COD: 36.540620

    Versione cilindrica con tolleranza passaporto H6

    Alloggiamento ottone, temperatura di esercizio fino a 200 ° c

    Art-Nr. D (mm) Tol. d1 (mm) d2 (mm) KM* (mm) EA** (mm) Peso (g) Forza(N)
    36.540620 6,0 h 6 20,0 +/-0,2 10,0 1,5 4,5 8
    36.540820 8,0 h 6 20,0 +/-0,2 10,0 1,5 8,0 22
    36.541020 10,0 h 6 20,0 +/-0,2 8,0 2,0 12,0 40
    36.541320 13,0 h 6 20,0 +/-0,2 6,0 2,5 20,0 60
    36.541620 16,0 h 6 20,0 +/-0,2 2,0 3,0 30,0 125
    36.542025 20,0 h 6 25,0 +/-0,2 5,0 4,0 60,0 250
    36.542535 25,0 h 6 35,0 +/-0,3 7,0 5,0 134,0 400
    36.543240 32,0 h 6 40,0 +/-0,3 4,5 6,0 251,0 600

    * Senza ridurre la forza adesiva, è possibile accorciare il sistema con la misura (KM).
    * * Se installato in ferro, è necessario prestare attenzione affinché la distanza di installazione (EA) venga mantenuta dal mantello del sistema magnetico al ferro, in modo che non si verifichino cortocircuiti magnetici. Queste distanze devono anche essere mantenute all’indietro se il sistema è accorciato dalla misura (KM) e installato in ferro.

  • COD: 36.640620

    Versione cilindrica con tolleranza passaporto H6

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB)
    Alloggiamento ottone, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. KM* (mm) EA** (mm) Peso (g) Forza (N)
    36.640620 6,0 h6 20,0 +/-0,2 10,0 1,5 4,5 10
    36.640820 8,0 h6 20,0 +/-0,2 10,0 1,5 8,0 25
    36.641020 10,0 h6 20,0 +/-0,2 8,0 2,0 12,0 45
    36.641320 13,0 h6 20,0 +/-0,2 6,0 2,5 20,0 70
    36.641620 16,0 h6 20,0 +/-0,2 2,0 3,0 30,0 150
    36.642025 20,0 h6 25,0 +/-0,2 5,0 4,0 59,0 280
    36.642535 25,0 h6 35,0 +/-0,3 7,0 5,0 132,0 450
    36.643240 32,0 h6 40,0 +/-0,3 4,5 6,0 246,0 700

    * Senza ridurre la forza adesiva, è possibile accorciare il sistema con la misura (KM).
    * * Se installato in ferro, è necessario prestare attenzione affinché la distanza di installazione (EA) venga mantenuta dal mantello del sistema magnetico al ferro, in modo che non si verifichino cortocircuiti magnetici. Queste distanze devono anche essere mantenute all’indietro se il sistema è accorciato dalla misura (KM) e installato in ferro.

  • COD: 36.340610

    Versione cilindrica con tolleranza passaporto H6

    Sistemi magnetici con nucleo in alluminio nickel cobalto (AlNiCo)
    Alloggiamento zincato, temperatura di esercizio fino a 450 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. KM* (mm) Peso Forza (N)
    36.340610 6,0 h 6 10,0 +/-0,2 2,0 2,0 2,0
    36.340812 8,0 h 6 12,0 +/-0,2 3,0 4,0 4,0
    36.341016 10,0 h 6 16,0 +/-0,2 6,0 9,0 8,5
    36.341318 13,0 h 6 18,0 +/-0,2 6,0 18,0 12,0
    36.341620 16,0 h 6 20,0 +/-0,2 6,0 30,0 20,0
    36.342025 20,0 h 6 25,0 +/-0,2 6,0 60,0 40,0
    36.342530 25,0 h 6 30,0 +/-0,2 10,0 105,0 60,0
    36.343235 32,0 h 6 35,0 +/-0,2 5,0 190,0 160,0
    36.344045 40,0 h 6 45,0 +/-0,2 5,0 390,0 240,0
    36.345050 50,0 h 6 50,0 +/-0,2 2,0 670,0 400,0
    36.346360 63,0 h 6 60,0 +/-0,2 5,0 1200,0 660,0

    * Senza ridurre la forza adesiva, è possibile accorciare il sistema con la misura (KM).

  • COD: 36.670620

    Versione cilindrica con tolleranza passaporto H6, con filettatura interna

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB)
    Alloggiamento ottone, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. Filo Peso(g) Forza (N)
    36.670620 6,0 h6 20,0 +/-0,2 M3x5 4,0 10
    36.670820 8,0 h6 20,0 +/-0,2 M3x5 7,5 25
    36.671020 10,0 h6 20,0 +/-0,2 M4x7 11,0 45
    36.671320 13,0 h6 20,0 +/-0,2 M4x7 19,5 70
    36.671625 16,0 h6 25,0 +/-0,2 M4x8 38,0 150
    36.672025 20,0 h6 25,0 +/-0,2 M6x6 58,0 280
    36.672535 25,0 h6 35,0 +/-0,3 M6x8 130,0 450
    36.673240 32,0 h6 40,0 +/-0,3 M6x6 243,0 700
  • COD: 36.350620

    Versione cilindrica senza tolleranza di adattamento

    Sistemi magnetici con nucleo in alluminio nickel cobalto (AlNiCo)
    Alloggiamento zincato, temperatura di esercizio fino a 450 ° c

    Art-Nr. D (mm) Tol. H (mm) Tol. KM* (mm) Peso Forza (N)
    36.350620 6,0 +/-0,2 20,0 +/-0,2 12,0 4,0 2,0
    36.350820 8,0 +/-0,2 20,0 +/-0,2 11,0 8,0 4,0
    36.351020 10,0 +/-0,2 20,0 +/-0,2 10,0 12,0 8,5
    36.351320 13,0 +/-0,2 20,0 +/-0,2 8,0 20,0 12,0
    36.351620 16,0 +/-0,2 20,0 +/-0,2 6,0 30,0 20,0
    36.352025 20,0 +/-0,2 25,0 +/-0,2 6,0 60,0 40,0
    36.352535 25,0 +/-0,3 35,0 +/-0,2 15,0 135,0 60,0
    36.353240 32,0 +/-0,3 40,0 +/-0,2 10,0 230,0 160,0
    36.354050 40,0 +/-0,3 50,0 +/-0,2 10,0 440,0 240,0
    36.355060 50,0 +/-0,3 60,0 +/-0,2 12,0 800,0 400,0
    36.356365 63,0 +/-0,3 65,0 +/-0,2 10,0 1356,0 660,0

    * Senza ridurre la forza adesiva, è possibile accorciare il sistema con la misura (KM).

  • COD: 35.681011

    Versione piatta con coni filettati

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB)
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. H (mm) h (mm) Tol. Filo Peso (g) Forza (N)
    35.681011 10,0 +/-0,2 11,5 4,5 +/-0,1 M 3 2,5 25
    35.681012 10,0 +/-0,2 12,5 4,5 +/-0,1 M 4 3,0 25
    35.681312 13,0 +/-0,2 12,5 4,5 +/-0,1 M 5 5,0 60
    35.681612 16,0 +/-0,2 12,5 4,5 +/-0,1 M 6 8,0 95
    35.682016 20,0 +/-0,2 16,0 6,0 +/-0,1 M 6 15,0 140
    35.682517 25,0 +/-0,2 17,0 7,0 +/-0,2 M 6 27,0 200
    35.683217 32,0 +/-0,3 17,0 7,0 +/-0,2 M 6 42,0 350
    35.684020 40,0 +/-0,1 20,0 8,0 +/-0,2 M 8 80,0 670
  • COD: 35.261604

    Versione piatta con foratura passante

    Alloggiamento zincato, temperatura di esercizio fino a 200 ° C

    Art.-Nr. D(mm) Tol. d1 (mm) d2 (mm) H (mm) Tol. Per vite Peso Materiale (N)
    35.261604 16,0 +/-0,2 3,5 6,5 4,5 +0,2/-0,1 M3 4,0 14,0
    35.262006 20,0 +/-0,2 4,2 9,4 6,0 +0,2/-0,1 M4 9,0 27,0
    35.262507 25,0 +/-0,2 5,5 11,5 7,0 +0,3/-0,2 M5 17,0 36,0
    35.263207 32,0 +/-0,3 5,5 11,5 7,0 +0,3/-0,2 M5 27,0 72,0
    35.264008 40,0 +/-0,3 5,5 11,5 8,0 +0,4/-0,2 M5 52,0 90,0

    Corpo in acciaio inossidabile, temperatura di esercizio fino a 220 ° C

    Art-Nr. D (mm) Tol. d1 (mm) d2 (mm) H (mm) Tol. Per Vite Peso Materiale (N)
    35.262006E 20,0 +/-0,2 4,2 9,4 6,0 +0,2/-0,1 M4 9,0 22,0
    35.262507E 25,0 +/-0,2 5,5 11,5 7,0 +0,3/-0,2 M5 17,0 29,0
    35.263207E 32,0 +/-0,3 5,5 11,5 7,0 +0,3/-0,2 M5 27,0 58,0
    35.264008E 40,0 +/-0,3 5,5 11,5 8,0 +0,4/-0,2 M5 52,0 72,0
    35.262006E 20,0 +/-0,2 4,2 9,4 6,0 +0,2/-0,1 M4 9,0 22,0
  • COD: 35.661604

    Versione piatta con foratura passante

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB)
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. d1 (mm) d2 (mm) H (mm) Tol. Per Vite Peso (g) Forza (N)
    35.661604 16,0 +/-0,2 3,5 6,6 4,5 +/-0,1 M 3 6,0 75
    35.662006 20,0 +/-0,2 4,5 9,0 6,0 +/-0,1 M 4 13,0 105
    35.662507 25,0 +/-0,2 4,5 9,0 7,0 +/-0,2 M 4 24,0 160
    35.663207 32,0 +/-0,3 5,5 11,0 7,0 +/-0,2 M 5 39,0 310
    35.664008 40,0 +/-0,3 5,5 10,6 8,0 +/-0,2 M 5 73,0 500

     

  • COD: 35.520611

    Versione piatta con presa filettata

    Alloggiamento zincato, temperatura di esercizio fino a 200 ° c

    Art-Nr. D(mm) Tol. d(mm) H(mm) h(mm) Tol. Filo Peso(g) Forza(N)
    35.520611 6,0 +/-0,1 6,0 11,5 4,5 +/-0,1 M 3 2,0 5
    35.520811 8,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 3 3,0 11
    35.521011 10,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 3 4,0 20
    35.521311 13,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 3 6,0 40
    35.521611 16,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 4 7,0 60
    35.522013 20,0 +/-0,2 8,0 13,0 6,0 +/-0,1 M 4 16,0 90
    35.522514 25,0 +/-0,2 8,0 14,0 7,0 +/-0,2 M 4 28,0 150
    35.523215 32,0 +/-0,3 10,0 15,5 7,0 +/-0,2 M 5 47,0 220
  • COD: 35.620611

    Versione piatta con presa filettata

    Sistemi magnetici con ferro al neodimio al nucleo (NdFeB)
    Alloggiamento zincato, temperatura di esercizio fino a 80 ° c

    Art-Nr. D (mm) Tol. d (mm) H (mm) h(mm) Tol. Filo Peso (g) Forza(N)
    35.620611 6,0 +/-0,1 6,0 11,5 4,5 +/-0,1 M 3 2,0 5
    35.620811 8,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 3 3,0 13
    35.621011 10,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 3 4,0 25
    35.621311 13,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 3 5,0 60
    35.621611 16,0 +/-0,2 6,0 11,5 4,5 +/-0,1 M 4 7,0 95
    35.622013 20,0 +/-0,2 8,0 13,0 6,0 +/-0,1 M 4 16,0 140
    35.622514 25,0 +/-0,2 8,0 14,0 7,0 +/-0,2 M 4 27,0 200
    35.623215 32,0 +/-0,3 10,0 15,5 7,0 +/-0,2 M 5 45,0 350
    35.624018 40,0 +/-0,1 10,0 18,0 8,0 +/-0,2 M 6 80,0 670
    35.625022 50,0 +/-0,1 15,0 22,0 8,0 +/-0,2 M 8 158,0 1000
  • COD: 35.562006E

    Versione piatta con Zyl. Perforazione di transito

    Cassa acciaio inox, temperatura di esercizio fino a 350 ° c

    Art-Nr. D(mm) Tol. d1(mm) d2(mm) H(mm) Tol. Peso.(g) Forza.(N)
    35.562006E 20,0 +/-0,2 4,5 8,0 6,0 +/-0,1 13,0 60
    35.562507E 25,0 +/-0,2 4,5 8,0 7,0 +/-0,2 24,0 80
    35.563207E 32,0 +/-0,3 5,5 11,0 7,0 +/-0,2 39,0 200
    35.564008E 40,0 +/-0,3 5,5 10,0 8,0 +/-0,2 75,0 420